Download HFV 8000 Generator

Advanced Energy®
Table 4-7. Host port commands (Continued)
Command
14
tuning goal
Description
Specifies the desired goal that the tuning
algorithm will attempt to achieve. Send two
bytes, least significant byte first, representing
the desired goal.
Number of
Host Data
Bytes
Number of
Response
Data Bytes
2
1
CSR only
2
1
CSR only
4
1
CSR only
4
1
CSR only
2
1
CSR only
• Range is 1 to 8000
Read back with command 153. See also
“Tuning goal” on page 5-14.
15
tuning gain
Specifies the gain used in the tuning
algorithm. Send two bytes, least significant
byte first, representing the tuning gain.
• Accepts a value of 1 to 1000
Read back with command 154. See also
“Tuning gain” on page 5-14.
16
tuning delta
limits
Specifies the maximum frequency delta for
the tuning algorithm. Send four bytes, least
significant byte first, representing the tuning
delta limit.
• Accepts a value of 1 to 100000
Read back with command 155. See also
“Tuning delta limit (Hz)” on page 5-14.
19
scan delta
Specifies the frequency step size for the scan
algorithm. Send four bytes, least significant
byte first, representing the scan delta in Hertz.
• Accepts a value of 1 to 10000 (1 to
10000 Hz).
Read back with command 156. See also
“Scan delta frequency (Hz)” on page 5-14.
20
scan
threshold
Specifies the threshold at which the scan
algorithm completes. Send two bytes, least
significant byte first, representing the scan
threshold.
• Accepts a value of 1 to 8000
Read back with command 157. See also
“Scan threshold” on page 5-14.
4-20
Communication Interfaces
5705072-F