Download FrameSaver 9124 User`s Guide 9124-A2-GB20-00

Troubleshooting
PVC Loopback
The PVC Loopback loops frames back to the selected interface on a per-PVC
basis. This test logically (not physically) loops back frames received from another
FrameSaver device through the selected frame relay PVC to the same device.
Main Menu → Test → Network PVC Tests → PVC Loopback
Network PVC Loopback
DTE
PVC #x
Network
PVC #x
98-16186
Main Menu → Test → Data Port PVC Tests → PVC Loopback
Port PVC Loopback
DTE
PVC #x
Network
PVC #x
98-16187
Send Pattern
This test sends packets filled with a hexadecimal 55 test pattern and sequence
number over the selected interface and DLCI to another FrameSaver device.
To send a pattern test on a link:
Main Menu → Test → [Network PVC Tests/Data Port PVC Tests] →
Send Pattern
If the selected
DLCI is configured as . . . Then . . .
And the default
Rate (kbps) setting is . . .
Standard
(Disruptive) appears
after Test
100% of CIR
Multiplexed
(Non-Disruptive)
appears after Test
10% of CIR
If the CIR is zero, the pattern will be sent at a rate of 1000 bps.
6-20
March 2000
9124-A2-GB20-00