Download 1747-6.1, Data Table Access Module, User Manual
Transcript
B-6 SLC 500 Data Files and Logical Addressing Data File 4 - Timers Timers are 3-word elements. Word 0 is the control word, word 1 stores the preset value, and word 2 stores the accumulator value. This is illustrated below. Timer Element 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 Word EN TT DN Internal Use Preset Value PRE Accumulated Value ACC Addressable Bits Addressable Words EN =Enable TT = Timer Timing DN =Done PRE =Preset Value ACC =Accumulated Value 0 1 2 Bits labeled "Internal Use" are not addressable. Assign timer addresses as follows: Format Tf:e Examples: Explanation T Timer f File number. : Element delimiter e Element number T4:0 Number 4 is the default file. A file number between 10-255 can be used if additional storage is required. Ranges from 0 to 255. These are 3-word elements. See the figure above. Element 0, timer file 4. Address bits and words by using the format TF:e.s/b where Tf:e is explained above, and . is the word delimiter s indicates subelement / is the bit delimiter b indicates bit Publication 1747-6.1 T4:0/15 T4:0/14 T4:0/13 Enable bit Timer timing bit Done bit T4:0.1 T4:0.2 Preset value of the timer Accumulated value of the timer T4:0.1/0 T4:0.2/0 Bit 0 of the preset value Bit 0 of the accumulated value