Download User guide for TF7100HDPVRtPlus
Transcript
9.1 Configuring the router 69 4. Accessing the FTP Server of the digital receiver. NOTE The web server and FTP server of the digital receiver do not work in standby mode. So it must be powered up at all times if you wish to use the web service at any time. 9.1 Configuring the router In this section, the setup program of WRT54G, which is a router manufactured by Linksys, will be referred to as an example of how to configure the router for network access. NOTE For detailed description about how to set up the router, refer to the manual of your router. 9.1.1 To access within the local area network Once your router is powered up, a local area network gets created whether or not it is connected to the Internet. You can let the router automatically assign a dynamic IP address to the computers or devices connected to the network by enabling the DHCP server of the router. In this case, you can access the digital receiver with the IP address which is assigned to the digital receiver by the router. If the digital receiver reboots, a new dynamic IP address will be assigned to it. You had better assign a static IP address to the digital receiver to avoid this inconvenience. For how to assign a static IP address, refer to the manual of your router. For how to specify a static IP address on the digital receiver, see § 9.2. 9