Download Manual

BATTERY RECHARGING
The wheelchair batteries are recharged by connecting the charger plug into the driving controller’s
charger socket. During recharging, the battery charge level is shown as an icon on the display and
the wheelchair will not be possible to drive. Batteries must be recharged immediately, if the icon
indicating the battery charge level shows only two full pillars. Follow the instructions supplied with
the charger.
Use only the charger that has been supplied with the wheelchair.
Using incorrect chargers could damage the batteries, wheelchair or the charger itself.
FUSES
The wheelchair’s main fuse (80A) is situated between the
batteries. If it is blown, the wheelchair will not have any
electrical functions. The user must not change this fuse
themselves; the wheelchair must be taken for service.
R-NET
www.chasswheel.com
21