Download UPS WEB/SNMP MANAGER

C.
Syntax for switching of the outputs
Set the RCCMD client at port 6002 to “on” and restart it. Install the RCCMD Windows Wizard and
open a DOS box. The following is a syntax example with the IP address 192.168.202.165:
C:\RCCMD\
rccmd -s -a 192.168.222.238 -p 6002 -se "EXECUTE |UPSCMD|20000|1,1"
ATTENTION! The blank after the “Execute” is important!
Common syntax for the switching of the outputs of the SiteManager:
|UPSCMD|20000|1,0
|UPSCMD|20000|1,1
|UPSCMD|20000|2,0
|UPSCMD|20000|2,1
|UPSCMD|20000|3,0
|UPSCMD|20000|3,1
|UPSCMD|20000|4,0
|UPSCMD|20000|4,1
|UPSCMD|20000|5,0
|UPSCMD|20000|5,1
|UPSCMD|20000|6,0
|UPSCMD|20000|6,1
|UPSCMD|20000|7,0
|UPSCMD|20000|7,1
|UPSCMD|20000|8,0
|UPSCMD|20000|8,1
output
output
output
output
output
output
output
output
output
output
output
output
output
output
output
output
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
low
high
low
high
low
high
low
high
low
high
low
high
low
high
low
high
30
Copyright of the European Union is effective (Copyright EU) (c) 2011 GENEREX GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL [email protected] - WEB www.generex.de (This and all other product datasheets are available for download.)