Download GNSS Receiver External Interface Specification

RECEIVER OBJECTS
Ob jec ts Re fe re nc e
Reference Parameters
nates thus estimated will then be automatically used as the receiver's reference
position.
off – averaging mode is turned off.
Reference Position Averaging Interval
Name:
Access:
Type:
Values:
Default:
/par/ref/avg/span
rw
integer [seconds]
[0…32000]
180
Provided /par/ref/avg/mode parameter is on, this parameter specifies time interval over
which single-point position calculated by the receiver will be averaged before the result
of averaging will be used as receiver reference position.
Reference Antenna Parameters
Marker to Antenna Phase Center (APC) Offset
Name:
Access:
Type:
/par/ref/ant/offs
rw
list {east,north,height}
This parameter specifies the vector components between a surveyed point (land mark)
and the APC.
east – east offset
north – north offset
height – height offset
East Offset of APC
Name:
Access:
Type:
Values:
Default:
/par/ref/ant/offs/east
rw
float [meters]
[-100…100]
0
North Offset of APC
Name:
Access:
Type:
Values:
Default:
150
/par/ref/ant/offs/north
rw
float [meters]
[-100…100]
0
www.javad.com
GREIS