Download CM-VABus/TCP for ACU

CAUTION
When values are to be written cyclically at a high repetition rate, no entries shall be
made in the EEPROM, as this only allows a limited number of write cycles (approx. 1
million cycles). If the number of permissible write cycles is exceeded, the EEPROM will
be damaged. See chapter 8.1 “Handling of datasets / cyclic writing of parameters”.
6.1
Communication modules
CM-VABus/TCP
The CM-VABus/TCP communication module features an active RJ45 port.
CM-VABus/TCP-2P
The CM-VABus/TCP-2P communication module features two active RJ45 ports with integrated switching function. This enables easy linking (daisy chain) of frequency inverters which are connected to a
PLC.
6.1.1
Installation instructions
The VABus/TCP module is connected to the PLC or other devices using standard CAT cables and RJ45
connectors:
Ethernet standard:
IEEE 802.3, 100Base-TX (fast Ethernet)
Cable type:
S/FTP (cable with braided shield, (ISO/IEC 11801 or EN 50173, CAT5e
Straight Through of Cross Over)
26
ACU VABus/TCP
12/13