Download LMS 242 - NEXT
Transcript
DEVICE ID: This control assigns a device ID from 1 to 16 to the unit. This ID is only useful when a network of more than 1 unit is used in conjunction with 1 or more XPanel. S YS TEM Comm DEVICE ID:1 PORT: This allows the user to select which serial communication device to use, 2 RS232/USB or Ethernet. S YS TEM Comm PORT:RS232/USB 7.8 Security Password The factory default password is blank (“____”), it can be changed to any combination of 4 characters in this menu. OLD PW: The user is required to enter the old password first to modify the password. Passwd OLD PW:____ S YS TEM NEW PW: The new password desired. Passwd NEW PW:____ S YS TEM 2 This menu is only shown in older firmware versions. LMS 242 User's manual - Page 22