Download LMS 242 - NEXT

Transcript
DEVICE ID:
This control assigns a device ID from 1 to 16 to the unit. This ID is only
useful when a network of more than 1 unit is used in conjunction with 1 or
more XPanel.
S YS TEM
Comm
DEVICE ID:1
PORT:
This allows the user to select which serial communication device to use,
2
RS232/USB or Ethernet.
S YS TEM
Comm
PORT:RS232/USB
7.8
Security Password
The factory default password is blank (“____”), it can be changed to any
combination of 4 characters in this menu.
OLD PW:
The user is required to enter the old password first to modify the password.
Passwd
OLD PW:____
S YS TEM
NEW PW:
The new password desired.
Passwd
NEW PW:____
S YS TEM
2
This menu is only shown in older firmware versions.
LMS 242 User's manual - Page 22