Download MediaLB Analyzer

MediaLB Analyzer
4.2 Active-Pod MediaLB 3-Pin HS
An Active-Pod MediaLB 3-Pin HS has two connectors: one MediaLB Connector, which is used for connecting the Active-Pod to the MediaLB on the DUT and one Active-Pod Connector, which is used to connect
the Active-Pod by means of a special cable to the MediaLB Monitor. The cable is part of the MediaLB Monitor USB delivery.
Figure 4-2: Active-Pod MediaLB 3-Pin HS—Active-Pod Connector
Pin 1 Pin 3
GND
Pin 2 Pin 4
Figure 4-3: Active-Pod MediaLB 3-Pin HS—MediaLB Connector
User Manual
Copyright © 2008 - 2010 SMSC
UM_MediaLB_Analyzer_V02_00_XX-3
Page 21