Download 22-0031-001 - Yellow Machine Support
Transcript
About Network Interface Settings If you use the YM appliance as a router, you need two IP addresses—one for the LAN side and one for the WAN side. The YMM’s Network Interfaces window displays the network status including LAN IP address (Private IP address) and WAN IP address (Public IP address), DHCP services settings, and the default gateway: To learn more about networking terminology, go to “Glossary” on page 151. Set-up Method This field shows how each IP address is configured. Static IP address assigned manually by the administrator DHCP Client IP address acquired from a DHCP server PPPoE Client IP address acquired from the ISP's PPP server Interface This field shows whether each interface is enabled or disabled. Enabled Interface is enabled Disabled Interface is disabled Link Status This field shows whether the interface is connected or not. Connected Ethernet cable connected Disconnected Ethernet cable disconnected DHCP Service This field shows whether the DHCP Server service is enabled or not. Your choices are: Enabled Connected PCs can get IP addresses from the YM appliance Disabled DHCP Service disabled The starting address of the DHCP service is 172.16.1.100 presuming the default LAN address of the YM appliance is 172.16.1.1. The ending IP address is 172.16.1.200 and the lease time is one day. Default Gateway The default gateway enables you to connect to the Internet through the WAN port on the YM appliance to use the YM appliance’s integrated router. If your interface is set up for either DHCP Client or PPoE Client, the default gateway is automatically obtained from a server. Therefore, you cannot edit the default gateway. If your interface is Static, the LAN IP address (Private IP address) is set for the default gateway. LAN Port Status If you click LAN Port Status, the LAN port status window appears and shows each port's connection status and speed. The LAN port status will be constantly updated until the window is closed. About Network Interface Settings 27