Download IP CCTV Solution Central Management System – Lite User Manual

Telexper International Inc.
A member of VisionSoft
3F-3, No.2, Chien Pa Rd., Chung Ho City,
Taipei 235, Taiwan, R.O.C.
Tel: 886-2-6620-5898 Fax: 886-2-6620-6909
E-mail: [email protected]
http://www.telexper.com ISO 9001:2000
Alarm: When the alarm is raising the camera icon will display in red and the display of the
Live-
Video live view screen will also jump to display the alarm camera image.
Motion: When the motion detect active the camera icon will display in red as the icon show
and the display of the Live-View screen will also jump to display the alarm camera image.
Control I/O: Allow you directly to switch the I/O device on and off such as light,
GPIO: Allow you to control the attached nGIPO device – RS485 to extend the I/O
control I/O to 4 devices for each nGPIO module.
The E-Map mode has two kinds of the display which due to you might use one monitor or dual
monitors for the CMS-Lite system.
For Dual Monitors: There will be a separate display of both Live View and E-Map screens.
For One Monitor: The E-Map will become a Quarter-size window of the Live View screen.
47
PDF created with pdfFactory trial version www.pdffactory.com
IP Security Solutions