Download 1 Click - Pdfstream.manualsonline.com

Security Measures
8
Use these features to protect your data.
z Other security measures
• SD Security (Î page 37)
• Embedded Security (TPM) (Î page 67): For further information, refer to the Installation Manual of “Trusted Platform
Module (TPM)”.
Setting the Supervisor Password/User Password
Set the Supervisor Password before setting the User Password.
1
2
3
4
Start up the Setup Utility (Î page 63).
Select [Security].
Select [Set Supervisor Password] or [Set User Password], and press Enter.
Enter your password in [Enter New Password] and press Enter.
z When the password has been set, you need to enter your password in [Enter Current Password] and press
Enter.
z To disable the password, leave the input field empty and press Enter.
5
6
7
Enter your password again in [Confirm New Password] and press Enter.
In [Setup Notice], press Enter.
Press F10, and then select [Yes] and press Enter.
CAUTION
z Do not forget your password. If you forget your Supervisor Password, you will not be able to use your computer. Contact Panasonic Technical Support.
z When running the Setup Utility, do not leave and go away from your computer even for a short time, since other people
may set or change the password.
NOTE
z The password will not be displayed on the screen.
z You can use up to 32 alphanumeric characters (including spaces).
• The case (upper/lower) is ignored.
• Use only the upper horizontal row of numeric keys to input your password.
• You cannot use Shift and Ctrl to input a password.
z Disabling the Supervisor Password also disables the User Password.