Download Basic Configuration: MICE Switch Power (MSP)

Transcript
Advanced functions of the device
9.2 Using the device as a DNS client
 Active the function globally in the "Operation" frame by clicking On.
Figure 86: Advanced:DNS:Server:Static dialog
enable
configure
dns client source user
dns client domain-name
devicel
dns client servers add 1 ip
10.1.3.5
dns client adminstate
Switch to the privileged EXEC mode.
Switch to the Configuration mode.
Sets the function to user to manually configure
the DNS client.
Enters device1 as a unique domain name for the
device.
Adds a DNS server with IP address of 10.1.3.5 as
index 1.
Activates the DNS client function.
Configure the DNS client to map static hosts with IP addresses.
 Open the Advanced:DNS:Server:Static Hosts dialog.
 To add a new entry to the table, click "Create".
 In the "Name" cell, enter example.com which is a name of a device
in the network.
 In the "IP Address" cell, enter 10.1.3.9.
250
UM BasicConfig MSP
Release 2.0 02/2013