Download N1660A User`s Guide

Transcript
Dual DS1/0 SCPI Commands
:L[1|2]:FETCh:PMASk:NEGative:DATA ?
:L[1|2]:FETCh:PMASk:NEGative:DATA ?
Use this command to query the data points of the negative pulse.
:L[1|2]:FETCh:PMASk:NEGative:FITStatus ?
Use this command to query the result of negative pulse fitting. 0 = failed,
1 = success, 2 = no data, 0xff = unavailable.
:L[1|2]:FETCh:PMASk:NEGative:AMPLitude ?
Use this command to query the negative pulse amplitude, in millivolts.
:L[1|2]:FETCh:PMASk:NEGative:RISE ?
Use this command to query the rise time of the negative pulse, in
nanoseconds.
8–90