Download ControlIR Model 915 User Manual - Precision Control Systems, Inc.
Transcript
• not source current for pyrometer operation. Connect the 4-20mA signal to TB 100 pins 18+ and 19-. “TCT” and “TCP” options: To use the alarm output as an external process alarm. Connect the device for the alarm output to TB 100 pins 20 and 21. If a remote alarm output is not used, the alarm may be connected to the front panel over-temp alarm indicator. Connect TB 100 pin 20 to pin 8 and TB 100 pin 21 to pin 11. The alarm indicator will flash while the temperature controller is in an alarm condition. Figure 3-2 Page 8 of 21