Download PyPES Library Manual
Transcript
Table 3 – Continued from previous page Command Options / Default / Description Default: None File specifying masses, should contain MASSES section in format described above. No special characters or empty lines are allowed. Takes precedence over MASSES in input_file. COORDS_CART_FILE file_name Default: None File specifying geometry in Cartesian coordinates, should contain CARTESIAN command in format described above. No special characters or empty lines are allowed. Takes precedence over CARTESIAN in input_file. COORDS_INT_FILE file_name Default: None File specifying geometry in internal coordinates, should contain INTERNAL command in format described above. 10 No special characters or empty lines are allowed. Takes precedence over INTERNAL in input_file. DO_NORMAL_MODE True or False Default: False, unless PRINT_DERIV_NM = True Performs normal mode analysis. Requires at least second derivatives of PES with respect to Cartesian coordinates to be calculated. Harmonic frequencies will be printed before and after projection of rotational and translational degrees of freedom, together with Cartesian vectors defining normal mode coordinates ( ∂X coeffi∂Q cients). Warning: Normal mode coordinates are only defined at equilibrium, it is not valid to perform normal mode analysis off equilibrium. If requesting normal mode derivatives at an off-equilibrium geometry it is your responsibility to provide valid normal mode coordinate vectors calculated at equilibrium, via the NEW_NM_COORDS keyword. NEW_NM_COORDS file_name Default: None Continued on next page