Download Technical Manual 3590E 09

3590EKR, 3590EXP, 3590EXT, CPWE, CPWET series indicator
E-AF09_02.00_13.01_EN_T
8.3 LIST OF PRINT BLOCKS
LEGEND:
b
indicates a space character (ASCII 32 decimal character).
UM
unit of measure of the active scale (kg, bg, bt, lb).
UMD
unit of measure of the database (kg, bg, bt, lb).
+T
terminator: depending on the setting of the SEtuP >> SEriAL >> tErMin “SET TERMINATOR TYPE” step of the
SET-UP environment, a CR or CRLF, LF or no terminator is added.
XXX*
These blocks do not work without the alibi memory (optional).
The weight field expands from right to left, with many spaces (ASCII 32 decimal character) for completing the field length.
NOTE
- The weight and weighing values expand from from right to left, with the necessary spaces in order to complete the field
length.
- The weighing numbers are increased with each input/output weighing cycle or with each single weigh.
8.3.1 ORDER BY KIND
CODE
PRINT FORMAT
GENERIC
300
307
308
309
318
319
320
366
367
368
369
372
373
374
377
378
379
380
392
410
421
422
423
424
PRINT END
DOTTED LINE
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- + T
PRINTS 3 CRLF
DATE / TIME FOR DP24/DP190
bHH:MMbDD/MM/YY + T
PRINTS ON PC PORT
PRINTS ON PRINTER PORT
FORCES PRINTOUT
DATE
DD/MM/YY + T
TIME
HH:MM + T
DATE TIME
DD/MM/YYbHH:MM + T
FOLLOWING MACRO TERMINATOR SKIPS
HEADING 1
XXXXXXXXXXXXXXXXXXXXXXXX
in which XXXXXXXXXXXXXXXX are the 24 characters of the first line of the heading; just the entered characters
are printed, from left to right.
HEADING 2
XXXXXXXXXXXXXXXXXXXXXXXX
HEADING 3
XXXXXXXXXXXXXXXXXXXXXXXX
PRINTS TERMINATOR
CR or CRLF or NO TERMINATOR
PRINTS A SPACE
b
SCALE UNIT OF MEASURE
UM
DATABASE UNIT OF MEASURE
UM
PRINTS WEIGH ID
IDb:XXX + T
In which XXX is the weigh number, from 1 to 999; only the entered characters are printed, expanding from left to
right.
JUST WEIGHT ID VALUE
XXX
In which XXX is the weigh number, from 1 to 999; only the entered characters are printed, expanding from left to
right.
STANDARD KD PROTOCOL STRING
AF0X PROTOCOL STRING
Through the blocks 421 and 422 it is possible to print the STANDARD or AFXX serial string (see section 5.4
TRANSMISSION PROTOCOLS for the description); the terminator of the string depends on the setting of the
SEtuP >> SEriAL >>tErMin step of the SET-UP environment (CR or CRLF or no terminator).
PRINTS TERMINATOR
CR or CRLF or NO TERMINATOR
RELEASES PAPER FOR TM295
92