1
Download Supercom 636
Transcript
3.1.4 LED display There’re four LEDs on the front of the device. Link : (Blue) Conditions The modem is ON A Bluetooth communication port is opened. The modem is OFF LED state ON Blinking 0.25s every 2s OFF Charge: (Red) Conditions Accumulators charged Low power ** Near empty Charging LED state OFF Blinking 0.25s every 3s 1 blink ON ** If the accumulators are near empty the device shuts down by itself. Tx : (yellow) Conditions A byte is transmitted via radio LED state 0.25s per byte Rx : (yellow) Conditions A byte is received via radio LED state 0.25s per byte 3.1.4.1 Switch ON sequence By turning ON the Supercom 636, the following LEDs sequence is running: 2 seconds The blue LED stays ON If another sequence is running contact your local Sontex agent or the Sontex technical support. (See last page of this document for contacts). Manual Supercom 636 rev. 211010 7
