Download HF-A11
Transcript
HF-A11 Embedded WiFi Module User Manual +ok<CR>< LF ><CR>< LF > Parameters: usr: User name for WEB page access; password:Password for WEB page access; Fl yi n g 4.2.2.14. AT+WAP Function: Set/Query WIFI parameters as AP; Format: Query Operation AT+WAP<CR> +ok=<wifi_mode,ssid,channel><CR>< LF ><CR>< LF > Set Operation AT+ WAP=<wifi_mode,ssid,channel><CR> +ok<CR>< LF ><CR>< LF > Parameters: wifi_mode: WiFi protocols 11BG 11B 11G 11BGN 11N ssid: SSID when module works as AP; channel: WIFI channel selection AUTO CH1~CH11 This Instruction only effective for HF-A11 works as AP. After HF-A11 module boots up again, the setting will be effective. But user can set this command when module configured as STA. ig h- 4.2.2.15. AT+WAKEY Function: Set/Query WIFI security parameters as AP; Format: Query Operation AT+WAKEY<CR> +ok=<auth,encry,key><CR>< LF ><CR>< LF > Set Operation AT+ WAKEY=< auth,encry,key><CR> +ok<CR>< LF ><CR>< LF > Parameters: H auth: Authentication mode OPEN SHARED WPAPSK encry:Encryption algorithm NONE: When “auth=OPEN”, effective; WEP: When “auth=OPEN”, effective or “SHARED”, effective; TKIP: When “auth=WPAPSK”, effective; AES:When “auth=WPAPSK”, effective; TKIPAES:When “auth=WPAPSK”, effective; key: password, ASCII code, shall less than 64 bit and greater than 8bit; This Instruction only effective for HF-A11 works as AP. After HF-A11 module boots up again, the setting will be effective. But user can set this command when module configured as STA. 4.2.2.16. AT+HIDESSID Function: Set/Query hide AP’s SSID; Shanghai High-Flying Electronics Technology Co., Ltd (www.hi-flying.com) 42