Download TELEPOOL Professional

TELEPOOL PROFESSIONAL
TELEPOOL INSTALLATION MANUAL
- The wall has to be well smooth to allow the perfect adhesion of the various parts of the
equipment.
- There hasn't to be water or possible spray coming from closed zones.
- Use, as power supply, a tension among 85-265Vac-50/60Hz without interference. Avoid
absolutely reconstructed connection , for example, with the aid of transformers where the supply
goes feeding other systems over the controller (even inductive type ) because it can create spike
of tension also of 1000 Volts that once radiated can be hardly eliminated.
- The electric feeding line must be provided of opportune ground fault interrupter, in the respect
of the good norms of installation; in every case it always well to verify the goodness of the
ground connection
- The controller must be installed to the wall making attention that there is enough space for the
passage of the wires and to look at the display of visualization data.
Lacing to the electric line:
Assuring that the feeding as to respects what already told on the previous paragraph, connect the
electric line using the supplied special cable.
10 / 32