1
Download Admin PM-V2-Modified
Transcript
Issue 2.0 July, 2010 PGM 180 Flex Btn Description Default Values Transfer Recall Timer 7 This parameter sets the duration transferred calls ring the intended receiver before recalling the transferring station. 030 seconds 000 ~ 300 in 1 second increments ACNR Delay Timer 8 When no CO line is available for an ACNR attempt, this parameter sets the delay before ACNR reattempts access to a CO line. This will not affect the retry counter. 030 seconds 000 ~ 300 in 1 second increments ACNR No Answer Timer 9 This parameter sets the duration of ringback tone before an ACNR attempt terminates, the call disconnects and the retry counter increments. 30 seconds 01 ~ 50 in 1 second increments ACNR Pause Timer 10 This parameter sets the time between ACNR attempts, at expiration the ip-60 attempts ACNR. 030 seconds 005 to 300 in 1 second increments ACNR Retry Counter 11 This parameter determines the number of attempts the system will make for a given ACNR request. After the assigned number of attempts, ip-60 cancels the ACNR 03 01 ~ 30 1 1~9 030 seconds 000 ~ 300 in 1 request. ACNR No Tone Retry Counter 12 This parameter determines the maximum number of times ACNR attempts to secure a CO line. If a CO line is not seized (all lines busy or out-of-service), ip-60 cancels the ACNR request. ACNR Tone Detect Timer 13 This parameter sets the duration the system will monitor the CO line for valid call progress tones. If ip-60 detects busy or reorder tone or the timer expires, the second increments attempt terminates, the CO line disconnects and the retry counter increments. Automatic CO 14 Release Timer This parameter sets the duration the system will wait for a user to dial on an outgoing 030 seconds 020 ~ 300 in 1 second increments CO line call. If the timer expires, the call attempt terminates and the station receives error tone. CCR Inter-digit Timer 15 This parameter sets the duration the system will wait between dialed digits for a CCR 030 (3 seconds) 000 ~ 255 in 100 millsecond increments 10 seconds 00 ~ 99 in 1 second increments or DISA/DID CO call. After the timer expires, the call is routed based on the received digits. CO Call Drop Warning Timer 16 This parameter sets the duration a Prepaid or Unsupervised Conference call remains connected after receiving Call Drop Warning Tone. After this timer expires, the call 117
