Download User Manual

TEMPUS. User Manual
- SYNC: Synchronizes the slot/s BPM value with the Master
BPM.
Shift (Filter): Turn the control to adjust the FILTER parameter.
Press the control to On/Off this function.
- MONITOR CUE (
): Pre-listen the respective channel
through the headphones output.
- 1/2 – MASTER: This switch lets you display the Master
Output level if it is in the Master position, or channel output
level if it is in the 1/2 position.
- CHANNEL FADER: These faders let you modify the channel
volume.
- CROSSFADER: This horizontal fader let you select the
channel that you will listen through the Master output. If
crossfader is placed in the central part the two channels will be
listened simultaneously.
- AUTO CROSSDAFER: These buttons let you move the
Traktor crossfader automatically.
Shift (Snap ( ) & Quant ( )): Snap and Quantize mode
On/Off.
4. SAMPLE SIZE
- IN: Sample size is doubled.
Shift (Copy from Loop Rec.): Set the Loop Recorder loop on
slot 1.
- OUT: Sample size is halved.
Shift (Copy from Loop Rec.): Set the Loop Recorder loop on
slot 2.
- ACTIVE: Set sample size to original value.
Shift (Copy from Loop Rec.): Set the Loop Recorder loop on
slot 3.
5. UNLOAD
These functions will be available if the controller is configured
in Mode 2.
DELETE: To unload the sample firstly you must select the
sample that you want to unload and secondly you must press
the unload button.
Shift (Copy from Loop Rec.): Set the Loop Recorder loop on
slot 4.
1. VOLUME/FILTER
6. SELECT SLOT
- AUTOLOOP: Turn the control to adjust the slot/s volume.
Press the control to mute/unmute the slot/s.
Shift (Filter): Turn the control to adjust the slot/s FILTER
parameter. Press the control to On/Off this function.
- FX1 y FX2: With these buttons, you can enable the FX Unit in
each deck.
Shift FX1 (FX Slot): Enable the FX Unit of single slot.
Shift FX2 (Play Mode): Change the play mode of each slot.
Play Mode are: One Shoot or Loop Mode.
This buttons group let you select one or all the Sample Deck
slots.
If the slot is selected, the corresponding Led is lit and you can
modify/execute functions as Volume, Filter, Pitchbend,
Play/Pause, Key Lock, Sync o Unload
To select one slot you must press the appropriate button.
Button 1 corresponds to slot 1, button 2 to slot 2, and so on.
To select all slots you must press the button of the active slot
(the lit button). When all slots are active, the four buttons are
lit.
Shift (Load from Deck): This function lets you copy one
loop/sample from Track Deck to any slot of the Sample Deck.
3. TEMPO
7. PLAY SAMPLE
- PITCHBEND: These buttons let you slow down or speed up
the tempo of the slot/s while they are pressed.
- KEY ( ): Press to enable the KEY LOCK function in each
slot.
- PLAY BUTTONS: Each button controls one slot of the
Sample deck. Pressing any of these buttons we start the
playing of the corresponding slot.
If the slot is empty, load the sample selected from the track list.
Shift (Slot Retrigger): This function lets you skip at the
beginning of the sample.
SAMPLE DECK.
2. EFFECTS
20