1
Download Documentation: Digi TransPort User Guide
Transcript
Mobile parameters PRL update CLI commands Entity Instance Parameter Values Equivalent Web Parameter provision 0 string1 Free text field MSL provision 0 string20 Free text field PRL Filename Advanced Mobile parameters SIM PUK: (Optional) If known, the SIM PUK code can be entered in these fields. If the router detects that a PUK is required due to a locked SIM, this number will be sent to the SIM. A SIM PIN must also be configured for the PUK parameter to take effect. Confirm SIM PUK: Enter the PUK code again in this field to confirm it. Initialisation string <n>: These parameters (Initialisation string 1, Initialisation string 2, Initialisation string 3) allow you to specify a number of command strings that are sent to the wireless module each time a wireless connection is attempted. These can be used to set non-standard wireless operating modes. Each string is prefixed with the characters AT before being sent to the wireless module and they are sent to the wireless module in the order specified until an empty string is encountered. For example, Initialisation string 3 will not be sent unless Initialisation string 1 and Initialisation string 2 are both specified. Initialisation strings are not normally required for most applications as the unit will normally be pre-configured for correct operation with most networks. Hang-up string: Digi TransPort User Guide 81
