1
Download Documentation: Digi TransPort User Guide
Transcript
TPAD parameters Entity Instance Parameter Values Equivalent Web Parameter tpad n uaarc 0 - 99 Use response code n in unable to authorise message tpad n clear_dirtime 0 - 60000 Clearing time n milliseconds tpad n trandel 0 - 5000 Delay transmitting the APACS 30 string for x milliseconds after connecting to X.25 host tpad n teretran 1 = enabled, 0 = disabled Retransmit APACS 30 string if error detected tpad n delstx 1 = enabled, 0 = disabled STX/ETX removal tpad n no_enq 1 = enabled, 0 = disabled Do not transmit ENQ characters tpad n tenqdel 0 - 5000 Delay sending ENQ characters to TPAD terminal for x milliseconds when a call has been connected tpad n tackdel 0 – 10000 Wait for x milliseconds for an ACK before retransmitting the data tpad n dsync 1 = enabled, 0 = disabled Transmit TPAD transactions directly in a Synchronous frame tpad n inclrc 1 = enabled, 0 = disabled Include LRC tpad n incllrc 1 = enabled, 0 = disabled Include LRC line tpad n fpar 1 = enabled, 0 = disabled Force parity when sending data to the terminal tpad n lrpar 1 = enabled, 0 = disabled Strip parity when sending data to the host tpad n lfpar 1 = enabled, 0 = disabled Force parity when sending data to the host tpad n strip_tspaces 1 = enabled, 0 = disabled Strip Trailing Spaces tpad n ackdat 1 = enabled, 0 = disabled Acknowledge TPAD data packets tpad n stx_2_soh 1 = enabled, 0 = disabled Convert leading STX character to SOH tpad n eot_only 1 = enabled, 0 = disabled Terminate TPAD call is EOT only Digi TransPort User Guide 331
