Download Manual

Transcript
3.1.9 Command: system > netstatus
Parameter: N/A
Description: show the status about IP address
Example:
3.1.10 Command: system > netsettingIPv4
Parameter: [<IpAddr>] set IP address
[<netmask>] set netmask
[<gatewayip>] set gateway
[<dnsip>] set DNS server
Description: set the IP detail of switch
Example:
3.1.11 Command: system > netsettingIPv6
Parameter: N/A
Description: set the IP address of IPv6
Example:
104