Download Manual

5. Router
6. Telephone
7. DOCSIS cable device
8. Station only
9. Reserved
When a capability is enabled, the capability is followed by (+). If the capability is
disabled, the capability is followed by (-).
Management Address
Management Address is the neighbor unit's address that is used for higher layer
entities to assist discovery by the network management. This could for instance hold
the neighbor's IP address.
6.12.3. LLDP Statistics
This page provides an overview of all LLDP traffic.
Two types of counters are shown. Total are counters that refer to the whole stack,
switch, while Port refer to per port counters for the currently selected switch.
Total
Neighbours Aged Out
Shows the number of entries deleted due to Time-To-Live expiring.
Neighbours Added
66