Download 4 - OKI Support

Scanning to Local PC
10 Click [Restart search] to restart the
13 Remove the “Software DVD-ROM” from
device search.
the computer.
The installation is complete.
Reference
After the machine is displayed, select the machine
and click [Next].
●● When installing ActKey, Network Configuration is
also installed simultaneously. Network Configuration
automatically acquires the IP address of your machine
and network information (IP address, computer name,
port number) of the computer. If the IP address or other
settings of the machine or computer is changed, you need
to change the settings. For details, refer to the User’s
Manual (Advanced) > “3. Scanning” > “Using Drivers and
Software” > “Using ActKey Software” > “Using Network
Configuration”.
„„ For USB Connection
Memo
●● You can skip this procedure if the scanner driver and
ActKey are already installed on your computer.
Memo
1 Prepare a USB cable.
A USB cable is not supplied with your machine.
Prepare a USB 2.0 cable separately.
●● If the machine is not displayed by clicking [Restart
search], select [Printer name/IP Address] and
enter the IP address assigned to your machine, and
then click [Next].
11 If the [Windows Security] dialog box
is displayed, click [Install this driver
software anyway].
Memo
●● Use a USB 2.0 Hi-Speed cable for a USB 2.0 HiSpeed connection.
12 Click the [Exit] button.
2 Hold down the power switch for
approximately one second to turn off the
power.
- 83 -
4
Scanning
To configure the Scan to Local PC function via
the USB connection, install a scanner driver and
ActKey on the computer.