1
Download ControlLogix® Redundancy System User Manual
Transcript
Chapter 2 Design the System Use this chapter to design a redundancy system for a ControlLogix controller How to Use this Chapter 1 To design your system, complete the following tasks: Task: See page: ❑ Lay Out the System 2-2 ❑ Place the I/O 2-4 ❑ Add Additional Redundant Components 2-5 ❑ Check Connection Requirements 2-6 ❑ Assign ControlNet Addresses 2-7 ❑ Select a Network Update Time 2-9 ❑ Estimate the Switchover Time 2-11 Publication 1756-UM523C-EN-P - June 2003
