Download NetSim Help - Index


Enable Packet Trace (Optional)

Run Simulation
Create Scenario
Adding CPE - Click on the CPE icon in the toolbar and drop the CPE on the environment.
Adding Router - Click on the Router icon in the tool bar, click and drop the Router on the
environment. By default a Router has eight ports.
Establishing Connections
The steps for connecting CPE and Router are as follows:

The connections between two CPEs cannot be made in the network.

The connection possibilities are
 CPE to Router and
 Router to Router.
Set the Properties for the devices and links
Right click over the devices and then select Properties to set the properties of the links and the
devices
Modifying/Viewing/Accepting Properties
On opening an already configured properties of an application the input fields will be frozen (i.e.
the input cannot be changed).To modify these values click on the Modify button in the screen.
Now the input value can be changed. Click on the Accept button, the modified values will be
saved.
This View button is enabled once the Accept Button is clicked. To view the given values, click
on the View button.
Enable Packet Trace (Optional)
Click Packet Trace icon in the tool bar. Set the name and path and select the required attributes.
To get detailed help, please refer Generating Packet trace.
Run Simulation - Select the Simulation Time and then Click on “OK” button to start the
Simulation
21