Download User Manual

Installation
3.1.3. Unpacking
and Inspection
ALLON™ 2001
The ALLON 2001 device has undergone full quality assurance
testing before shipment and should be operational upon delivery.
The unit should be unpacked, installed and tested only by
MTRE’s authorized personnel. No attempt should be made by
the purchaser to unpack or assemble the unit alone.
Report any container damage prior to opening the
container, or any unit damage prior to unpacking,
installation, or testing to your MTRE distributor.
NOTE
3.1.4. Assembling
the Handle
Assemble the handle as follows:
1.
2.
3.
Release the four thumb captive screws by hand.
Slide the two ends of the handle into the holes in the top
cover (pay attention to the direction of the curve in the
handle) until the handle is inserted all the way in (see
Figure 3-1).
Press in and screw the four thumb captive screws by
hand (do not use force when screwing) to secure the
handle and the top cover.
Thumb Screws
Figure 3-1 Handle Assembly
3-2