Download Operating Manual

Operating Manual
Matrix
RIGHT-HAND cuts
Fig. 25
LEFT-HAND cuts
D910533ZR
OPTIONAL on vers.230V
STANDARD on vers.120V
Fig. 26
REGULATING CARRIAGE SPRING for LASER KEYS
With the motor power switch (Q) off, loosen the knob (O) slightly (Fig. 23).
• Central cuts:
Take the tools above the keys centred over the key stem (Fig. 24).
• Right-hand cuts:
Take the tools above the keys to the left of the key stem (Fig. 25).
• Left-hand cuts:
Take the tools above the keys to the right of the key stem (Fig. 26).
- Lock the knob (O) and proceed with cutting.
Copyright Silca 2012
19