Download brinkmann - Ramirent

Transcript
Maintenance card 08-001
Engine
Page 5 of 5
BRINKMANN
MASCHINENFABRIK GMBH & CO. KG
Check for leaks
The following checks are necessary after changing the engine oil or
engine oil filter:
Start the machine and allow to run for approx. 2 minutes.
Inspect the oil drain plugs and oil filter seal for leaks.
Shut down the machine again. Chapter 7.6 Shutting down the machine.
Seal up any leaks that may occur.
Check the engine oil level and top up, if necessary.
WK08-001_0605en
7 − 41