Download Operation manual

Transcript
 04.11.2013 15 VIBRATO: automatic washing machine MSA19.709 / MSA19.710
To create or change a program, select the corresponding storage place.
After confirmation, the overview of the selected storage space is displayed.
One can now move the cursor by turning the ENC and change the value by pressing on the
appropriate location as described earlier in this guide.
In the field "Name:" it is advisable to enter a descriptive name to the program so that other users can
easily identify the program.
The input of letters is made by turning the ENC and confirmed by pressing on it.
"Step": shows the step number in the program. If no steps have been programmed, the number "0"
appears.
"Duration": it is determined on the basis of different cleaning times in each bath, spinning and
drying, times as well as the duration of the movements. As soon as a cleaning program has been
completely executed, the machine calculates the duration of the movements and the total duration. It
displays them immediately on numeric value and on the progress bar.
"Counter": it displays the number of uses of a program in memory.
"Counter reset": to reset the counter, select [Counter reset] and confirm by pressing on the ENC.
"Step": To create a step sequence ‐ a sequence of various cleaning programs ‐ select [Step] and
confirm by pressing the ENC.
The name of the sequence of steps is selected here because during the cleaning program and the
programming, the different steps are represented on the right of the display as a sequence from top to
bottom.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Swiss Market
HOROTEC SA
Export Markets T +41 32 925 95 95
Av. Léopold-Robert 105b
T +41 32 911 21 21
F +41 32 925 95 96
2300 La Chaux-de-Fonds
F +41 32 911 21 22
E [email protected]
Switzerland - www.horotec.ch
E [email protected]