1
Download SCADAPack 32 Controller
Transcript
Specifications 5 Volt Power Output 5V at 1.3A capacity 5V at 500 mA required by SCADAPack 32 controller DC power Output 20-24V with 1.0Vp-p maximum ripple. 300mA available at 5V/0.5A, de-rate linearly to 100mA available at 5V/1.3A 16Vrms applied Efficiency 80%, 12V on DC PWR input I/O Expansion Capacity 5000 I/O Expansion Capacity Maximum 20 I/O modules. Input Points 3 Digital Input/Counter, 1 Interrupt Digital Inputs opto coupler isolation Digital Input, Counter 24Vrms/30V maximum input 10Vrms/10V minimum ON input 2V maximum OFF input Typical threshold voltage is 4 to 6V Typical input hysteresis 1.0V Typical input current 2.5mA at 10V 7mA at 24V Counter Input 5kHz maximum with filter OFF Frequency (Counter 0, 1, 2) 30Hz maximum with filter ON Counter Input Frequency 500Hz maximum (Counter 3, INT) Digital Outputs Status Output (STATUS) Document (Version 2.24.1.84) 5/19/2011 Opto coupler open collector transistor 30V, 60mA 64
