Download Manual - EH Wachs

Transcript
Chapter 4, Maintenance
Chapter 4
Maintenance
In This Chapter
LUBRICATION
LUBRICATION
REPAIR
There is one grease fitting on the valve operator head.
Apply grease every few hours of operation.
Figure 4-1. Apply grease through the grease fitting
on the head.
REPAIR
The revolution counter display and sensors can be replaced
in the event they become damaged or stop working.
Before performing any service, make sure the valve operator is unplugged from the electrical source.
E.H. Wachs
Part No. U10-010-MAN, Rev. 0-0310
17