Download warning - MusicToolz

Transcript
6
Specification
Measurements are made at ‘Attitude’ setting ‘1’. in Triode
mode with an output of +4dBu. Measurements made with AC
mains input 236V 50Hz. Load resistance is 10kΩ.
Available gain (dB)
Mic
Line
Frequency response
±1dB
Distortion (THD @ 1kHz)
Noise (unweighted, 30kHz
filter)
MOL (2% THD @1kHz)
Phase shift
Input impedance
Mic
Line
DI
Output impedance
56 (87 with Attitude at max. (P))
24
10Hz to 45kHz
≤0.05%
≤95dB below MOL
≥+25dBu
24º (6.6%) at 10kHz
1kΩ
10kΩ
100kΩ unbalanced
600Ω
10kΩ is the ideal load impedance. The Rooster 2 will work into a
load of 600Ω, but distortion will increase & MOL will be reduced.
©Thermionic Culture Ltd., May 2014
12