Download User Manual - Cradlepoint

User Manual / AER2100
•
•
10/29/15
Unmanaged Checkin Timer: How often,
in seconds, the router checks with
ECM to see if the router is remotely
activated. Note that this value is a
starting point for an internal backoff
timer that reduces network usage over
time.
Maximum Alerts Buffer: The maximum
number of alerts to buffer when
offline.
DEVICE ALERTS
The Device Alerts submenu choice allows you to receive email notifications of specific system events. YOU MUST
ENABLE AN SMTP EMAIL SERVER TO RECEIVE ALERTS.
Alerts can be included for the following:
•
•
•
•
•
•
•
•
•
•
•
•
•
Firmware Upgrade Available: A
firmware update is available for this
device.
System Reboot Occurred: This router
has rebooted. This depends on NTP
being enabled and available to report
the correct time.
Unrecognized MAC Address: Used with
the MAC monitoring lists. An alert is
sent when a new unrecognized MAC
address is connected to the router.
WAN Device Status Change: An
attached WAN device has changed
status. The possible statuses are
plugged, unplugged, connected, and
disconnected.
Configuration Change: A change to the
router configuration.
Login Success: A successful login
attempt has been detected.
Login Failure: A failed login attempt
has been detected.
Account Locked: Account has been
locked due to excessive failed login attempts.
IP Address Banned: An IP address has been banned.
VPN Tunnel Goes Down: Sends an alert when a VPN tunnel goes down.
Feature License Expiration: Sends an alert when a feature license is about to expire.
Router SDK Application: A router SDK Application may send an alert.
Full System Log: The system log has filled. This alert contains the contents of the system log.
©2015 Cradlepoint. All Rights Reserved. | +1.855.813.3385 | cradlepoint.com
88