Download Chapter 1 - Datatronics

5.63
Remote Access Operation
*E
Command *E enables or disables RA operation.
5.64
*E0
Disables RA operation.
*E1
Enables RA operation.
Set Remote Access Password
*P
Command *P sets an RA password, which is required to establish an
RA link. No password is set at the factory. Please note the following
before setting the RA password:
1) Command *P must be the last command in a command line.
2) The RA password is limited to 9 printable ASCII characters.
3) The RA SEC CHANNEL in the LCD SETUP Main Menu:
Remote Access Directory must be ON before an RA connection is
possible.
5.65 Maximum MNP Block Size
\A
Command \A sets the maximum MNP block size for reliable links.
\A0
Block size is 64 characters.
\A1
Block size is 128 characters.
\A2
Block size is 192 characters.
\A3
Block size is 256 characters.
5.66 Transmit Break
Range: 0-9
\Bn
Units: 100 ms
Default: 3 (300 ms)
Command \Bn instructs the modem to transmit a break signal to the remote system. In direct links, the break length depends on the value of n.
For example:
Page: 61