Download PhoneWatch Home Safety System
Transcript
Description of the Home Safety System How to use the keypad and keytag The control unit is the brain of the Home Safety System, it is fitted separately from the keypad and is hidden from potential view and damage. The control unit collects data that is sent by the sensors, it registers arming and disarming and communicates with the PhoneWatch Alarm Receiving Centre. The keypad is equipped with a keytag reader allowing users to arm/disarm the alarm system using either a valid code or keytag. It also has an internal siren. The keypad can have up to 9 users configured. To add, remove or configure users, please contact PhoneWatch. Properties RADIO ALARM TRANSMISSION •Narrow band FM, 868 MHZ • Built-in alarm transmitter •Unique identification for every component in the system, interference from neighbouring systems is not possible • Transmission is monitored using periodical testing • Reports interference ELECTRICS •220v - 240v ac with battery back-up •Built-in surge protection KEYTAG READER SIREN ARM/DISARM AREA FUNCTIONS • 3 settings: Away and Home and Off • Up to 24 sensors • Alert functions • Control unit and sensors are tamper-proof •Monitoring of power supply LOUD SPEAKER PANIC BUTTONS SYSTEM FAULT (Light2) SYSTEM ARMED (Light1) TAMPER ALERT (Light4) ALARM ACTIVATED (Light3) ARMING BUTTON FOR WHOLE SYSTEM (AWAY) ARMING BUTTON FOR PART OF SYSTEM (HOME) KEYTAG 4 5