Download sendquick alert plus server 1.5 administration user manual

Strictly Private and Confidential
Figure 2: Set IP address
Figure 3: Confirm IP address
Insert the desired IP address, Netmask and Gateway. Use the arrow keys to navigate and insert the
value. Follow the instruction at the bottom of the screen. Once complete, activate the setting
(Figure 3) and you can then access the system via web browser using the configured IP address.
Connect the server to the LAN and you can access using a web browser. Enter the IP on your
browser and you will see a second Log-in page as shown in Figure 4.
Copyright2002-2006, TalariaX Pte Ltd
SendQuick Alert Plus Server 1.5 Administration User Manual
7