1
Download Manual - Vector
Transcript
Manual Driver Installation 5.5.2 FlexRay Device test FRLoop.exe The operating test for FlexRay can be executed with the following devices: > VN3300 > VN3600 > VN7570 > VN7572 > VN7600 > VN7610 > VN8910A with VN8970 > VN8912 with VN8970/VN8972 This operating test requires an inserted FRpiggy. 1. Remove the FlexRay cable if it is connected. 2. Start \Drivers\Common\FRLoop.exe from the driver CD. 3. Execute the test. 4. If no error messages occur, the operating test was successful. © Vector Informatik GmbH Version 1.5 - 46 -
