Download User Manual

User Manual
located at 1”, 3”, 6”, 12”… from the tail and the nose.
You don’t need to fill in each position box.
The outline and the profile will be automatically adjusted on the guidelines if you check the box “Automatic
fitting”.
Press “OK” to see the board in the Design mode.
The guidelines appear as green crosses. Their list, with the positions, appears on the right hand side of the
bottom of the screen.
You can change their position with the mouse, or the keyboard, or with a right click in the “Guidelines” box,
which will make the following window appear.
After changing the position of the guidelines, you can automatically fit the curves on the guidelines doing a
right click on the selected curve.