Download Untitled - Shopify

Method of usage
Method of usage
NOTES
1. When you stand up, cannot with your body press on the two sides top edge of
armrest, see figure 1
2. Cannot press inward on the top edge of arm rest see figure 2
3. Cannot sit on the top edge of armrest see figure 3
WARNINGS
Ready for the handle controller tray, steel pole, take out the fixed screws on the handle
controller tray. (Figure 1)
Insert the ball joint of the steel pole to the concave spherical of the handle controller
tray.(figure 2)
Figure 1
( Figure 1)
WARNINGS
WARNINGS
Figure 2
( Figure 2)
Screw the screws in to the hole which got in step 1 and tighten it, take care the
direction, should be screw it from right to left. (Figure 3)
Prepare the cylindrical fixed pipe.(Figure 4)
Figure 3
( Figure 3)
7.Handle controller frame installation
Handle
controller tray
( Figure 4)
Put the cylindrical fixed pipe in to the hole on the right armrest, take care that the
sthere hole on the fixed pipe should be one to one corresponded with the hole on
the arm rest ofthe flange plate. (figure 5)
Screw three screws to tighten it ( figure 6)
Screw
Frame
Handle controller
frame assembly
Note: the gap should be face down
and vertical to the earth
( Figure 5)
12
( Figure 6)
13