Download Fluent Tips & Tricks

Saving Adaption Register for subsequent use (Solution 617)
ƒ The adaption register information is not stored either in case or data files. The information is
lost upon saving and reopening the case/data files
ƒ There is no direct way to preserve the register for subsequent use
ƒ To preserve the information in the register, create a User Defined Scalar (UDS) storage,
initialize/patch the UDF value for all the cells in the domain with 0, and then patch the value of
1 in all the cells of the register. The overall procedure is:
1.
2.
3.
4.
Generate the register by any means (Boundary, Gradient, Iso-Value, Region...)
Define a UDS
Patch the UDS with 0 for all cells in the domain
Patch the UDS with 1 for all the registers that you want to keep (use the number 2, 3, 4… if
you have a second, third, fourth… register, respectively)
5. When the case is saved, the UDS will remain in the database
6. Open the case again and regenerate the register by using Iso-Value Adaption with UDS
values between 0.9 and 1.1
51 / 75