Download UP-1080p - COMM-TEC
Transcript
User Manual COMM-TEC UP-1080p 12 Technical specifications Video Inputs 2 x Composite 2 x S-Video 2 x Component 2 x VGA 4 x HDMI Audio Input 8 x Audio Stereo 1 x Microphone Video Output 1 x VGA 1 x HDMI Audio Output 1 x digital Audio 1 x analog Audio Connector: Cinch Video standard: PAL, SECAM, NTSC 3.58, NTSC 4.43 Connector: 4pin MiniDIN Video standard: PAL, SECAM, NTSC 3.58, NTSC 4.43 Connector: 3 x Cinch Type: (YPbPr/YCbCr) Resolution: up to 1080i Connector: D-Sub HD 15 pin (female) Sync input: Separate, Composite, Sync-on-green Resolution: up to 1600x1200 Horizontal scan range: 30 - 81 kHz Vertical scan range: 56 – 75 Hz Bandwidth: 170 MHz Connector: HDMI-A Support protocol: HDMI 1.3a, DVI 1.0, HDCP 1.3, x. v. Color, True HD, DTS-HD Pixel bandwidth: 165 MHz Bandwidth:2.25 Gbps Resolution: up to 1600x1200@60_24bit Color depth / HDTV 1920x1080p@60_24bit Color depth Input EDID: Use the system default EDID, EDID support for the terminal is mapped to the input Maximum input cable lenght: Less than 25 meter, 1920x1080p @ 60Hz Recommend to use a HDMI certified cable Connector: 4 x Phoenix 10pin connector balanced audio input Bandwidth: 20 Hz ~ 20 kHz Impedance: Input: >10 kΩ (Balance/ Unbalanced) Max input level:+19.5 dBu, (Balance/ Unbalance) Input mapped by default to the analog video inputs Connector :6,3 mm jack MIC Type: Dynamic Sensor Input Sensitivity: 25 mV Bandwidth: 50 Hz ~ 16 KHz Connector: D-Sub HD 15 pin (female) Signal type: RGBHV Connector: HDMI-A Resolution: 800×600 @60Hz, 1024×768@60Hz, 1280×720@60Hz, 1280×800@60Hz, 1280×1024@60Hz, 1366×768@60Hz, 1440×900@60Hz, 1440×1050@60Hz, 1600×900@60Hz, 1600×1200@60Hz, 1680×1050@60Hz, 1920×1080@60Hz Audio: Audio output on HDMI can be switched off Maximum output cable length: Less than 10 meter, 1920x1080p @ 60Hz Recommend to use a HDMI certified cable On HDMI output, Audio can be switched off Connector:2 x RCA Impedance: 50 Ω Max output level:+19.5dBu COMM-TEC GMBH www.comm-tec.de 20 of 21