Download User`s Manual
Transcript
Chapter 1 Concepts for Using MKY02 (HUB) 1.5 Multi-drop Network of HUBs When adding HUBs to the CUnet, the user can connect HUBs as multi-drop (Fig. 1.8). The multi-drop network of HUBs is suitable for a user system in which the network cables should be divided. The number of inserted HUBs shown in Figure 1.8 is “2”. As shown in Figure 1.8, in cases where port 0 of the HUB is placed in the intermediate position (the halfway position in the network cable) of a multi-drop network, do not connect a termination resistor to the port 0. For details of the connection of a termination resistor, refer to “CUnet Technical Guide”. 1 - 11