Download Professional Report

Redvision User Manual
8
JOYSTICK
T HE J OYSTICK /CONTROLLER KEY SETTINGS CAN BE ADJUSTED WITHIN THIS MENU AREA .
TO ACCESS JOYSTICK SETTINGS ;
Login
Main menu
Joystick
8.1 JOYSTICK CURVE
THERE ARE THREE SETTINGS . THE RESPONSIVENESS OF EACH SETTING DEPENDS ON
THE MAKE OF CONTROL EQUIPMENT BEING USED .



QUASI LINEAR – SLOW THEN SPEEDS UP
LINEAR - CONSTANT
NON LINEAR – FAST THEN SLOWS DOWN
QUASI LINEAR IS THE DEFAULT.
8.2 ZOOM RATIO
THE ZOOM RATIO DICTATES BY HOW MUCH THE PAN
CAMERA ZOOMS IN . THE DEFAULT SETTING IS 16.
& TILT SLOWS DOWN AS THE
8.3 JOYSTICK SPEED
DEFAULT SETTING IS
60%. USE ▼▲ TO INCREASE /DECREASE .
8.4 JOYSTICK CREEP MODE
PROVIDES ENHANCED CONTROL AT SLOW SPEEDS
8.5 PAN LIMITS
THE REDVISION DOME CAN BE PROGRAMMED TO PAN ONLY WITHIN PRE - DEFINED LEFT
AND RIGHT LIMITS . THIS CAN BE USEFUL IF THE DOME IS MOUNTED ON THE CORNER OF A
BUILDING OR A WALL . IF PRESETS ARE PROGRAMMED THE DOME WILL STAY WITHIN THE
PERMITTED LIMITS , AND NOT TAKE THE SHORTEST ROUTE .
`
PAGE 36