Download vista-128fb-v1-insta..

Section 24 – Data Field Descriptions
*50
SESCOA/RADIONICS SELECT
[0]
Enter 0 if Radionics format is to be used with hexadecimal 0-9, B-F reporting. Enter 1 if
Sescoa format is to be used with only numeric reporting (0-9). Note that selection applies
to both primary and secondary phone numbers.
*51
DUAL REPORTING
[0]
This field allows all reports to be sent to both primary and secondary phone numbers.
Enter 1 if all reports are to be sent to both primary and secondary phone numbers. If
used with Split Reporting option 1 (1*34), Alarms go to both primary and secondary
numbers, while all other reports go to secondary only. If used with Split Reporting option
2, alarms go to both lines, Open/Close and Test messages go to secondary only, while all
other reports go to primary. If used with Split Reporting option 3, Fire Alarms and
Supervisory reports go to primary, all reports go to secondary.
*52
STANDARD/EXPANDED REPORT PRIMARY
Alm
Rst
Byp
Trbl
Opn/Cls Low Batt
Enter 0 for standard or 1 for expanded reporting for the primary phone number; default
is 0. Default is [000000].
Note: Expanded overrides 4+2 format.
*53
STANDARD/EXPANDED REPORT SECONDARY
Alm
Rst
Byp
Trbl
Opn/Cls Low Batt
Enter 0 for standard or 1 for expanded reporting for the secondary phone number;
default is 0. Default is [000000].
Note: Expanded overrides 4+2 format.
*56
USE ONLY LRR (LONG RANGE RADIO)
[0]
Enter 1 if the built-in dialer is not being used and only the LRR will be used to
communicate. Otherwise enter 0.
*57
USE LRR (LONG RANGE RADIO) IF DIALER FAILS
[0]
Enter 1 if LRR is to be used as a backup to the built-in dialer if the dialer fails. The
radio messages begin transmitting the same time as the dialer. Once the dialer receives
a kissoff, the LRR will stop transmitting no matter where it might be within its
sequence. Otherwise enter 0.
*58
LONG RANGE RADIO CENTRAL STATION #1 CATEGORY ENABLE
Alm
Trbl
Byp
Opn/Cls Syst
Test
Enter 1 to enable reports for primary Subscriber ID of Long Range Radio. Otherwise,
enter 0. Default is [000000].
*59
LONG RANGE RADIO CENTRAL STATION #2 CATEGORY ENABLE
Alm
Trbl
Byp
Opn/Cls Syst
Test
Enter 1 to enable reports for secondary Subscriber ID of Long Range Radio. Otherwise,
enter 0. Default is [000000].
24-7